dlcorp.nedopc.com (ZX-Форум) (21+, запрещено для детей)

Уже несколько дней как готовы платы 2.666LE. И сегодня собрал последнюю плату 2.666 без LE. Завелась сразу, как не странно. Кому что надо, обращайтесь. Правда я завтра на дачу сваливаю до следующейц недели... До полного счастия остается только дописать эмулятор вг93, но это как только, так и сразу. Типа любимая дача важнее...

Наконец-то, дождался! Беру 1 собранную. Оплата почтой, пойдет?
Напишу в мыло, сегодня.

KOE, фотка - супер! Всё великолепие и паяльники, с1-83, лохматый писёвый корпус:)

KOE wrote:Правда я завтра на дачу сваливаю до следующейц недели... До полного счастия остается только дописать эмулятор вг93, но это как только, так и сразу. Типа любимая дача важнее...

PENTAGON 2.666LE will use hardware or software emulation of KR1818VG93 ?

software like a 2.666. but emulation are still not finished

нолька wrote:software like a 2.666. but emulation are still not finished

??? hardware emulation in fpga (not software).

The authors aim is to make some VG93-like hardware in FPGA. It is still EMULATION since no one knows internal structure of genuine KR1818VG93 and the best one can do is to approach functionality and compatibility gradually (though not fully).
As deathsoft says, VG93 code in unreal speccy is very complicated so no one should assume that KOE will do compatible and accurate VG93 code for FPGA at least in the near future. All you will have is something that fool many but not ALL programs. The only easy way to have full compatibility is to use real KR1818VG93 as it is done in ZX-Evo.

luzanov wrote:Оплата почтой, пойдет?

Да.

VELESOFT wrote:PENTAGON 2.666LE will use hardware or software emulation of KR1818VG93 ?

The hardware equivalent (not emulator) of kr1818vg93 is under development now. It will operate in fpga and use Spectrum RAM to store the TRD disk image. User can load/save images from/to flash memory or hard drive or CD/DVD.

нолька wrote:software like a 2.666. but emulation are still not finished

Who said this?

dlcorp wrote: It is still EMULATION

lvd preved. It is not emulation but I am not against you to think so.

dlcorp wrote:The only easy way to have full compatibility is to use real KR1818VG93 as it is done in ZX-Evo.

Try to advertise products which are not having any relations to the Pentagon 2.666 somewhere outside here. Govnoforum is the best place for such purposes.

uncledim wrote:с1-83

Мой любимый совеццкий ширпотребный осцилл. Пользуюсь им до сих пор, несмотря на то, что есть уже аппарат и помощнее. В своем ряду С1-83 - образец грамотно спроектированного устройства, от схемотехники и до дизайна корпуса и расположения органов управления. Все продумано до мелочей. Буржуи сосут. Жалко, что только 5 МГц.

uncledim wrote:KOE, фотка - супер! Всё великолепие и паяльники,

Ну вот еще для затравки:

Буржуи всегда сосали и будут как-бэ.
Прикольно выглядет всё в зелени;)

KOE wrote:The hardware equivalent (not emulator) of kr1818vg93 is under development now. It will operate in fpga and use Spectrum RAM to store the TRD disk image. User can load/save images from/to flash memory or hard drive or CD/DVD.

it couldn't be hardware equivalent since nobody knows internal logic structure of KR1818VG93. So everything you (or, for example, deathsoft in his unreal) do is just an EMULATION of what real KR1818VG93 does. Same with T80, if you know what I'm speaking about.

KOE wrote:Try to advertise products which are not having any relations to the Pentagon 2.666 somewhere outside here. Govnoforum is the best place for such purposes.

Try to not fool your customers with the things that do not exist and won't exist in the near future. Currently 8/3 is almost useless.